Category: Coding & Service

I am very often asked the same questions related to the coding of VAG group cars (Volkswagen, Audi, Skoda, Seat).
I will try to create a small FAQ on this topic with solutions to the most common problems.

1) “Coding and service” does not appear. What to do?
In order for the “Coding and Service” item to appear, you need to: select one of the connection profiles for Audi, Volkswagen, Skoda, Seat (which one is not important) and connect to the car.

2) How do you know if I have MQB or PQ26 or MLB-EVO?
Under the “Coding and Service” section at the top, there is a platform selection. Models are indicated there.
Older platforms are not supported yet.

3) The current state of codings is read normally, but an unknown error occurs when trying to code any option.
First, use a quality ELM327 adapter.
Second, on many cars from 2021 onwards to apply the new value, you must open the hood and activate the handbrake. Sounds funny, but it’s true.

4) In the current state of the coding, it says “Coding is not supported or faulty ELM327 device”, although other codings are applied normally. Should I change my adapter?
No. You are shown two possible reasons: either the coding is not supported, or the problem is in the adapter. If the adapter allows you to use other encodings, then it is logical to conclude that the problem is not in it. By the method of exclusion, we discard one of the reasons and we are left with one reason: the coding is simply not supported by your car.

5) I did something and now I have something wrong. What to do?
Almost all operations and the initial state of codings are stored in the encoding history. All you need is to methodically restore operations from your coding history. Moreover, this should be done chronologically from the newest to the oldest points. Until what went wrong is corrected.
The most common mistake is that people think: the problem is caused by some specific coding, but in fact it is caused by another, earlier one (let’s say they performed 10 encodings, found that something went wrong, and think on one of the latter, although the problem is real at the very beginning). Therefore, I advise: if you do not know by 100%, methodically roll back everything. Missing nothing.
I strongly recommend that you back up all blocks before making any changes. Coding and Service -> Backup.

7) What’s wrong with my adapter? It can connect and read some data, but doesn’t let me read coding state and code anything.
Once again I repeat: the quality of the adapter is important. If a bad adapter doesn’t allow you to read or encode anything, that’s good. You just need to change it. It is much worse when a bad adapter pretends to be good, but sends garbage to the car or corrupts the data read from the car. This can lead to dire consequences.

8) Sometimes saving a new value is aborted. What to do?
The communication speed with the adapter is very important. Taking into account the general “slowness” of the ELM327 adapters, as well as the many different delays that occur when transferring data along the way car -> adapter -> Bluetooth / Wi-Fi -> phone -> program (and in the opposite direction), you should try to eliminate as much as possible all factors that affect the speed of data exchange. The most common factor: Bluetooth connection to the car radio. An active Bluetooth connection to the radio can reduce the speed of data exchange with the adapter by 5 times.
Therefore, during coding, disconnect the Bluetooth connection with your radio.

Sorry, this entry is only available in Русский.

Brakes (ABS, ESP, XDS, etc.)

• 1. Brake system bleed: KIA CERATO YD, Kia SORENTO UM, Kia OPTIMA JF
  
• 2. Brake system bleed: Kia Picanto JA, Kia RIO SC, Kia RIO YB
  
• 3. Brake system bleed: Kia Picanto TA, Kia Ceed ED, Kia Ceed JD, Kia Soul PS, Kia Venga, Kia Carnival YP
  
• 4. Brake system bleed: Kia RIO FB, Kia SPORTAGE QL, Kia STINGER CK, Kia Cadenza YG, Kia OPTIMA TF
  
• 5. Brake system bleed: Kia Rio QBR, Kia Rio UB, Kia CERATO TD, Kia SORENTO XM, Kia SOUL AM, Kia SPORTAGE SL, Kia QUORIS KH, Kia Cadenza VG, Kia CARENS RP
  

Engine and powertrain

• 1. Reset automatic transmission adaptation (4-speed AT)
  Compatibility: Hyundai/Kia with 4-speed Automatic Transmission with CAN bus (A4CF0, A4CF1, A4CF2). Compatibility depends on installed transmission control unit.
  Required conditions: ignition: ON, engine NOT started.
• 2. Reset automatic transmission adaptation (6-speed AT)
  Compatibility: Hyundai/Kia with 6-speed Automatic Transmission A6MF1/2/3, A6GF1/2/3, A6LF1/2/3. Compatibility depends on installed transmission control unit.
  Required conditions: ignition: ON, engine NOT started.
• 3. Reset engine control unit adaptations
  Compatibility confirmed with: Kia Picanto TA.

Service and maintenance (experimental features):

• 1. Interval between service (km)
  
• 2. Maintance type
  
• 3. Reset service reminder
  
• 4. Time between service (months)
  

Dashboard

• 1. Fuel consumption correction (%)
  Correction factor for fuel consumption and distance to empty
• 2. Fuel level correction (L)
  
• 3. Show free space in fuel tank in the dashboard
  
• 4. Test pointers at engine start
  

Engine and powertrain

• 1. 4WD operation mode
  Haldex 5 acoustic algorythm model

Multimedia

• 1. AM radio
  
• 2. AUX-in activation
  
• 3. USB mode
  

Mirrors

• 1. Fold mirrors when car locked
  

Seats

• 1. Retention of driver’s seat heater level
  
• 2. Retention of passenger’s seat heater level
  
• 3. Seat heater performance reduction
  

Sounds and alarm

• 1. Seat belts alerts
  

Service and maintenance

• 1. Distance since last mileage-dependent inspection (km)
  
• 2. Max. distance until next mileage-related inspection (km)
  
• 3. Max. time until next time-dependent inspection (days)
  
• 4. Maximum distance between service (km)
  Step = 100 km
• 5. Maximum distance to service
  Step = 100 km
• 6. Maximum time between service (days)
  
• 7. Mileage since last service (km)
  
• 8. Minimum distance between service (km)
  Step = 100 km
• 9. Minimum time between service (days)
  
• 10. Reset service interval reminder
  
• 11. Reset service interval reminder
  One click solution to reset service interval
• 12. Reset value for next mileage-dependent inspection (km)
  
• 13. Reset value for next time-dependent inspection (days)
  
• 14. Time since last service (days)
  
• 15. Time since last time-dependent inspection (days)
  

Long coding

• 1. 01. Engine
  
• 2. 02. Transmission
  
• 3. 03. Braking system
  
• 4. 04. Power steering
  
• 5. 05. Authorization system for access and starting the engine
  
• 6. 06. Front passenger seat
  
• 7. 08. Heater and climate
  
• 8. 09. Onboard supply control unit
  
• 9. 09. Onboard supply control unit -> Subsystem 1 (Wipers/Rain sensor)
  
• 10. 09. Onboard supply control unit -> Subsystem 2 (RLHS)
  
• 11. 0E. Media player 1
  
• 12. 10. Parking Assistant 2
  
• 13. 11. Engine Electronics No. 2
  
• 14. 13. Active cruise control
  
• 15. 14. Email system Damping controls
  
• 16. 15. Srs
  
• 17. 16. Steering column
  
• 18. 17. Dashboard
  
• 19. 18. Additional heater
  
• 20. 19. CAN Gateway
  
• 21. 1B. Active steering
  
• 22. 21. Energy Management 2
  
• 23. 22. Four-wheel drive
  
• 24. 23. Increased braking force
  
• 25. 25. Immobilizer
  
• 26. 26. Electric folding roof
  
• 27. 28. Climate Control Panel
  
• 28. 32. Differential lock electronics
  
• 29. 34. Ride height control system
  
• 30. 36. Driver seat adjustment
  
• 31. 37. Navigation system
  
• 32. 3C. Lane change assistant
  
• 33. 3D. Special function
  
• 34. 42. Driver door electronic equipment
  
• 35. 44. Power steering
  
• 36. 47. Acoustic system
  
• 37. 51. Electric drive
  
• 38. 52. Front passenger door electronics
  
• 39. 53. Parking brake
  
• 40. 55. Headlights corrector
  
• 41. 57. Tv tuner
  
• 42. 5F. Electronic Information System 1
  
• 43. 65. TPMS
  
• 44. 69. Trailer functions
  
• 45. 6C. Rear view camera system var.1
  
• 46. 6D. Boot lid
  
• 47. 6F. Comfort system central module 2
  
• 48. 6С. Rear view camera system var.2
  
• 49. 71. Charger
  
• 50. 75. Emergency Call and Communication Module
  
• 51. 76. Parking assistant
  
• 52. 77. Telephone
  
• 53. 7F. Electronic Information System 2
  
• 54. 94. Srs
  
• 55. 95. Esp
  
• 56. A5. Front Assistant A5
  
• 57. BB. Rear door behind driver
  
• 58. BC. Rear door behind passenger
  

Climate

• 1. Air quality sensor sensivity
  
• 2. Air recirculation when driving in reverse
  
• 3. Air recirculation with wipe/wash
  
• 4. Store air recirculation setting when ignition turned off
  
• 5. Temperature threshold for activation of auxiliary heater
  

Engine and powertrain

• 1. Block DPF regenerations (diesel only)
  This prevents the automatic and manual regeneration of DPF. If you turn it on, make sure you regularly perform manual DPF regeneration. You will need to disable this option before manually regenerating DPF.

Sounds and alarm

• 1. Seat belts alerts
  

Service and maintenance

• 1. Distance since last mileage-dependent inspection (km)
  
• 2. Distance since last service (km)
  
• 3. Max. distance until next mileage-related inspection (km)
  
• 4. Max. time until next time-dependent inspection (days)
  
• 5. Maximum distance between service (km)
  Step = 100 km
• 6. Maximum distance to service
  Step = 100 km
• 7. Maximum time between service (days)
  
• 8. Minimum distance between service (km)
  Step = 100 km
• 9. Minimum time between service (days)
  
• 10. Reset service interval reminder
  
• 11. Reset service interval reminder
  One click solution to reset service interval
• 12. Reset value for next mileage-dependent inspection (km)
  
• 13. Reset value for next time-dependent inspection (days)
  
• 14. Service regeneration of particulate filter (DPF) while driving
  Procedure description: start this procedure (you can do it while standing) and start driving on a highway, where you can do at least 60 km/h (40 mph) for 10-15 minutes. You should keep engine at 2000-2500 rpm. Your fuel tank should be full at least at 1/4. Please think before doing this.
• 15. Time since last service (days)
  
• 16. Time since last time-dependent inspection (days)
  

Long coding

• 1. 01. Engine
  
• 2. 02. Transmission
  
• 3. 03. Braking system
  
• 4. 04. Power steering
  
• 5. 05. Authorization system for access and starting the engine
  
• 6. 06. Front passenger seat
  
• 7. 08. Heater and climate
  
• 8. 09. Onboard supply control unit
  
• 9. 09. Onboard supply control unit -> Subsystem 1 (Wipers/Rain sensor)
  
• 10. 09. Onboard supply control unit -> Subsystem 2 (RLHS)
  
• 11. 0E. Media player 1
  
• 12. 10. Parking Assistant 2
  
• 13. 11. Engine Electronics No. 2
  
• 14. 13. Active cruise control
  
• 15. 14. Email system Damping controls
  
• 16. 15. Srs
  
• 17. 16. Steering column
  
• 18. 17. Dashboard
  
• 19. 18. Additional heater
  
• 20. 19. CAN Gateway
  
• 21. 1B. Active steering
  
• 22. 21. Energy Management 2
  
• 23. 22. Four-wheel drive
  
• 24. 23. Increased braking force
  
• 25. 25. Immobilizer
  
• 26. 26. Electric folding roof
  
• 27. 28. Climate Control Panel
  
• 28. 32. Differential lock electronics
  
• 29. 34. Ride height control system
  
• 30. 36. Driver seat adjustment
  
• 31. 37. Navigation system
  
• 32. 3C. Lane change assistant
  
• 33. 3D. Special function
  
• 34. 42. Driver door electronic equipment
  
• 35. 44. Power steering
  
• 36. 47. Acoustic system
  
• 37. 51. Electric drive
  
• 38. 52. Front passenger door electronics
  
• 39. 53. Parking brake
  
• 40. 55. Headlights corrector
  
• 41. 57. Tv tuner
  
• 42. 5F. Electronic Information System 1
  
• 43. 65. TPMS
  
• 44. 69. Trailer functions
  
• 45. 6C. Rear view camera system var.1
  
• 46. 6D. Boot lid
  
• 47. 6F. Comfort system central module 2
  
• 48. 6С. Rear view camera system var.2
  
• 49. 71. Charger
  
• 50. 75. Emergency Call and Communication Module
  
• 51. 76. Parking assistant
  
• 52. 77. Telephone
  
• 53. 7F. Electronic Information System 2
  
• 54. 94. Srs
  
• 55. 95. Esp
  
• 56. A5. Front Assistant A5
  
• 57. BB. Rear door behind driver
  
• 58. BC. Rear door behind passenger
  

List of PQ26 based cars:

Volkswagen Polo Mk5 Facelift (Typ 6C, 2014–2018), Škoda Fabia Mk3 (Typ NJ, 2014–present), Škoda Rapid (2017) (2017-2019), New Skoda Rapid MY 2020+, Volkswagen Polo-Sedan MY 2020+

Available Coding & service features for PQ26-based cars:

Assistance

• 1. Power steering support power
  
• 2. Steering mode
  
• 3. Steering mode selection activation
  
• 4. Torque steering compensation (TSC)
  

Backup

• 1. All units backup
  Creates full backup of all long coding and all adaptation values. Takes a very long time!
• 2. Backup copy of unit 01
  
• 3. Backup copy of unit 02
  
• 4. Backup copy of unit 03
  
• 5. Backup copy of unit 08
  
• 6. Backup copy of unit 09
  
• 7. Backup copy of unit 10
  
• 8. Backup copy of unit 17
  
• 9. Backup copy of unit 19
  
• 10. Backup copy of unit 44
  
• 11. Backup copy of unit 5F
  

Battery

• 1. Battery capacity (Ah)
  
• 2. Battery manufacturer
  Maximum length = 3 symbols
• 3. Battery serial number
  Maximum length = 10 symbols
• 4. Battery technology
  

Brakes (ABS, ESP, XDS, etc.)

• 1. ASR system adaptation
  
• 2. Brake booster adaptation
  Possible range: from 0 to 15
• 3. Brake disc drying
  Brakes are lightly applied automatically on regular intervals to keep the brake discs dry and ready for maximum braking
• 4. EDS system settings
  
• 5. ESC Off menu
  Options to display in ESC off menu: ASR off, ESC off, ESC Sport
• 6. HBA (brake assist) adaptation
  
• 7. Hill Hold control activation
  HCC prevents roll-back
• 8. Hill Hold control adaptation
  

Climate

• 1. Front glass heater temperature threshold (C)
  Minimum step 0.5 C
• 2. Front glass heater time before turning off (seconds)
  Minimum step – 40 seconds
• 3. Rear glass heater temperature threshold (C)
  Minimum step 0.5 C
• 4. Rear glass heater time before turning off (seconds)
  Minimum step – 40 seconds
• 5. Remember last air recyrculation position (with Climate control)
  
• 6. Remember last air recyrculation position (without Climate control)
  

Dashboard

• 1. Dashboard dial lights always on
  
• 2. Dashboard pointers lights always on
  
• 3. Display ECO/efficiency hints
  
• 4. Display oil temperature
  
• 5. Remove key warning
  
• 6. Show free space in fuel tank in the dashboard
  
• 7. Show lap timer
  
• 8. Test pointers at engine start
  
• 9. Time format (24/12)
  
• 10. Units: Date format
  
• 11. Units: Distance
  
• 12. Units: Fuel consumption (gasoline/diesel)
  
• 13. Units: Pressure
  
• 14. Units: Speed
  
• 15. Units: temperature
  
• 16. Units: Time format (12/24)
  
• 17. Units: Volume
  

Dashboard: lighting adjustment

• 1. Scales day brightness calibration: point 1: brightness value
  
• 2. Scales day brightness calibration: point 1: sensor value
  
• 3. Scales day brightness calibration: point 2: brightness value
  
• 4. Scales day brightness calibration: point 2: sensor value
  
• 5. Scales day brightness calibration: point 3: brightness value
  
• 6. Scales day brightness calibration: point 3: sensor value
  
• 7. Scales day brightness calibration: point 4: brightness value
  
• 8. Scales day brightness calibration: point 4: sensor value
  
• 9. Scales day brightness calibration: point 5: brightness value
  
• 10. Scales day brightness calibration: point 5: sensor value
  
• 11. Scales day brightness calibration: point 6: brightness value
  
• 12. Scales day brightness calibration: point 6: sensor value
  
• 13. Scales night brightness calibration: point 1: brightness value
  
• 14. Scales night brightness calibration: point 1: sensor value
  
• 15. Scales night brightness calibration: point 2: brightness value
  
• 16. Scales night brightness calibration: point 2: sensor value
  
• 17. Scales night brightness calibration: point 3: brightness value
  
• 18. Scales night brightness calibration: point 3: sensor value
  
• 19. Scales night brightness calibration: point 4: brightness value
  
• 20. Scales night brightness calibration: point 4: sensor value
  
• 21. Scales night brightness calibration: point 5: brightness value
  
• 22. Scales night brightness calibration: point 5: sensor value
  
• 23. Scales night brightness calibration: point 6: brightness value
  
• 24. Scales night brightness calibration: point 6: sensor value
  

Doors, Locking and Unlocking

• 1. Auto lock doors after speed threshold was reached
  
• 2. Auto unlock doors
  
• 3. Auto unlock doors when selector in parking
  
• 4. Autolock rear part of the vehicle
  
• 5. Driver door power window shut off delay after ignition was turned off (seconds)
  Maximum = 1275 seconds, step = 5 seconds
• 6. Electric window on driver door comfort control using key fob
  
• 7. Enable key open/close functions while engine running
  
• 8. Lock menu in MMI
  
• 9. Unlock doors options (new gen. BCM)
  
• 10. Unlock doors options (old gen. BCM)
  

Engine and powertrain

• 1. Accelerator pedal high sensivity
  Not recommended for cars with cruise control
• 2. Accelerator pedal response algorythm (variant 2)
  Better sensivity with “direct” value
• 3. Throttle adaptation
  In some cases this procedure improves reaction on accelerator pedal for a period of time

Exterior lights

• 1. Blink DRL with turn signal
  PQ26: Skoda Rapid
• 2. Blink front DRL with turn lights
  PQ26, Confirmed on Skoda Rapid
• 3. Blink front side lights with turn lights + front side lights turns off when low beam active
  PQ26: Skoda Rapid
• 4. Coming home activation (trim with light sensors)
  
• 5. Coming home activation (trim without light sensors)
  
• 6. Coming home/Leaving home lights
  
• 7. Corner function with front fog lights
  PQ26, Confirmed on Skoda Rapid
• 8. Corner function: regulation
  ECE R119 – works when the steering wheel is turned and when the turn signal is turned on with a 1 second delay
  ECE R48 – only works when you turn the steering wheel
  FMVSS 517 108 – works when the steering wheel is turned and when the turn signal is turned on
• 9. Corner function: upper speed threshold
  Maximum speed threshold for corner lights activation. Minimum step = 0.5 km/h
• 10. Disable license plate light when tailgate is opened
  
• 11. DRL: DRL menu item in Multimedia system (MMI)
  
• 12. DRL: Turn off DRL when parking brake activated
  
• 13. DRL: Turn off when light switch in off position
  DRL = Daytime running lights
• 14. Emergency braking lights
  
• 15. Front side light dimming when turn signal blinking
  PQ26: Skoda Rapid
• 16. LED DRL dimming when turn signal flashing
  PQ26: Skoda Rapid
• 17. LED DRL working with low beam
  PQ26: Skoda Rapid
• 18. License plate: light type (LED/5W)
  
• 19. Limit the maximum number of simultaneously burning front lights to 2 types
  This is often used for stroboscope effect
• 20. Rear side lights active with DRL
  PQ26: Skoda Rapid
• 21. Stroboscope effect when blinking high beam + front fog lights
  PQ26: Skoda Rapid
• 22. Stroboscope effect when blinking high beam + LED DRL
  PQ26: Skoda Rapid
• 23. Stroboscope effect when blinking high beam + low beam
  PQ26: Skoda Rapid
• 24. Turn lights: polite blinks count
  After applying this option reset light settings to factory defaults in car multimedia menu
• 25. Turn on stop lights on the side of opened door
  PQ26: Skoda Rapid
• 26. Turn on stop reverse light with Coming home or Leaving home functions
  PQ26: Skoda Rapid
• 27. Turning on side direction indicators when opening the boot
  PQ26: Skoda Rapid
• 28. US-style sidelight with turn signals
  PQ26: Skoda Rapid
• 29. US-style sidelight with turn signals (only when light switch in side lights position)
  PQ26: Skoda Rapid

Feedback signals

• 1. Acoustic feedback: activation or deactivation global setting
  
• 2. Acoustic feedback: duration when using signal horn
  
• 3. Acoustic feedback: menu in MMI
  
• 4. Acoustic feedback: use signal horn
  
• 5. Acoustic feedback: when locking
  
• 6. Acoustic feedback: when second close command
  Quittierton bei zweitem ZV-ZU-Befehl
• 7. Acoustic feedback: when unlocking
  
• 8. Confirmation sound when locking and unlocking central lock
  
• 9. Optical feedback: use 3rd brake light
  
• 10. Optical feedback: when comfort closing windows
  
• 11. Optical feedback: when locking
  

Interior lights

• 1. Smooth turn on buttons light
  
• 2. Turn on interior light when tailgate opened
  

Lighting adaptations

• 1. 0 BLK VL B35
  Usually front left turn signal
• 2. 1 BLK VR B23
  Usually front right turn signal
• 3. 2 SL VL B22
  Usually front left side light
• 4. 3 SL VRB36
  Usually front right side light
• 5. 4 TFL LB43
  Usually front left DRL
• 6. 5 TFL RB6
  Usually front right DRL
• 7. 6 ABL LB44
  Usually low beam left
• 8. 7 ABL RB5
  Usually low beam right
• 9. 8 FL LB42
  Usually high beam left
• 10. 9 FL RB7
  Usually high beam right
• 11. 10
  
• 12. 11 WARNBLK TASTER C54
  
• 13. 12 NL LB40
  Usually left fog light
• 14. 13 NL RB3
  Usually right fog light
• 15. 14 LOCKUNLOCK61
  
• 16. 15 SAFE LED C55
  
• 17. 16 BLK SLC11
  Left side turn light
• 18. 17 BLK SR A72
  Right side turn light
• 19. 18 BLK HLA71
  Usually rear left turn light
• 20. 19 BLK HRC8
  Usually rear right turn light
• 21. 20 BR LA70
  Usually left stop-signal
• 22. 21 BR RC8
  Usually right stop-signal
• 23. 22 BR MC9
  Usually 3rd stop-signal
• 24. 23 SL HLC7
  Usually rear left side light
• 25. 24 SL HRA69
  Usually rear right side light
• 26. 25 KZL HA60
  Usually number plate light
• 27. 26 NSL A65
  Usually rear left fog light
• 28. 27 KL58XS C67
  Terminal 58xs dimmer
• 29. 28 RFL C3
  Usually rear left reverse light
• 30. 29 KL30G A69
  Usually inside locker lights
• 31. 30 INNENLICHT A68
  Usually foot light
• 32. 31 AMBL 1C65
  
• 33. 32 AMBL 2C64
  
• 34. 33 AMBL 3C72
  
• 35. 34 AMBL 4C71
  
• 36. 35 LED Warnblinktaster C48
  

Long coding

• 1. 01. Engine
  
• 2. 02. Transmission
  
• 3. 03. Braking system
  
• 4. 04. Power steering
  
• 5. 05. Authorization system for access and starting the engine
  
• 6. 06. Front passenger seat
  
• 7. 08. Heater and climate
  
• 8. 09. Onboard supply control unit
  
• 9. 09. Onboard supply control unit -> Subsystem 1 (Wipers/Rain sensor)
  
• 10. 09. Onboard supply control unit -> Subsystem 2 (RLHS)
  
• 11. 0E. Media player 1
  
• 12. 10. Parking Assistant 2
  
• 13. 11. Engine Electronics No. 2
  
• 14. 13. Active cruise control
  
• 15. 14. Email system Damping controls
  
• 16. 15. Srs
  
• 17. 16. Steering column
  
• 18. 17. Dashboard
  
• 19. 18. Additional heater
  
• 20. 19. CAN Gateway
  
• 21. 1B. Active steering
  
• 22. 21. Energy Management 2
  
• 23. 22. Four-wheel drive
  
• 24. 23. Increased braking force
  
• 25. 25. Immobilizer
  
• 26. 26. Electric folding roof
  
• 27. 28. Climate Control Panel
  
• 28. 32. Differential lock electronics
  
• 29. 34. Ride height control system
  
• 30. 36. Driver seat adjustment
  
• 31. 37. Navigation system
  
• 32. 3C. Lane change assistant
  
• 33. 3D. Special function
  
• 34. 42. Driver door electronic equipment
  
• 35. 44. Power steering
  
• 36. 47. Acoustic system
  
• 37. 51. Electric drive
  
• 38. 52. Front passenger door electronics
  
• 39. 53. Parking brake
  
• 40. 55. Headlights corrector
  
• 41. 57. Tv tuner
  
• 42. 5F. Electronic Information System 1
  
• 43. 65. TPMS
  
• 44. 69. Trailer functions
  
• 45. 6C. Rear view camera system var.1
  
• 46. 6D. Boot lid
  
• 47. 6F. Comfort system central module 2
  
• 48. 6С. Rear view camera system var.2
  
• 49. 71. Charger
  
• 50. 75. Emergency Call and Communication Module
  
• 51. 76. Parking assistant
  
• 52. 77. Telephone
  
• 53. 7F. Electronic Information System 2
  
• 54. 94. Srs
  
• 55. 95. Esp
  
• 56. A5. Front Assistant A5
  
• 57. BB. Rear door behind driver
  
• 58. BC. Rear door behind passenger
  

Multimedia

• 1. Access trip computer in multimedia when ignition turned off”
  
• 2. AM radio
  Enable or disable AM radio
• 3. AUX input activation
  
• 4. Confirmation of installation changes
  Used after updating firmware, parts, POI, etc. to remove error 1555
• 5. Display comfort systems consumption in MMI
  
• 6. Display driving school mode in MMI
  
• 7. Microphone sensivity
  
• 8. Mirror link in motion speed threshold (MIB2)
  Use this to activate MirrorLink in motion
• 9. Mirror link in motion speed threshold (MIB3)
  Use this to activate MirrorLink in motion
• 10. MMI startup screen display time (seconds)
  Minimum step = 0.5 sec
• 11. MMI USB activation
  
• 12. Rear speakers activation after installation: 4 channels/6 passive speakers
  
• 13. Rear speakers activation after installation: 4 channels/8 passive speakers
  
• 14. Restart mutltimedia system
  After applying some codings you need to restart your multimedia system for changes to take effect
• 15. Show offroad screen in multimedia system (Swing-3)
  Compatibility: Swing-3
• 16. Swing/Bolero startup screen
  
• 17. Video in motion speed threshold (MIB2)
  Use this to activate Video in motion
• 18. Video in motion speed threshold (MIB3)
  Use this to activate Video in motion

Multimedia: sound quality

• 1. Activate Skoda Skoda Suround, Virtual Subwoofer (not compatible with CANTON)
  Enables Skoda Suround, Virtual Subwoofer and disables voice transmission to rear passengers. Don’t use with CANTON! MIB3 not supported.
• 2. Skoda only: individual sound processing preset (MIB2 Entry/Swing 2 before 2017 with SW. ver. 6xxx, MIB2 STD)
  This feature changes sound configuration preset when you have activated Skoda Virtual Subwoofer & Skoda Surround. Not compatible with CANTON!
• 3. Skoda only: individual sound processing preset (MIB2 Entry/Swing2 after 2017, GP/Swing3 with SW. ver. 7xxx, 8xxx)
  This feature changes sound configuration preset when you have activated Skoda Virtual Subwoofer & Skoda Surround. Not compatible with CANTON!
• 4. Sound processing preset (MIB2)
  This feature changes sound configuration to improve sound quality
• 5. Sound system type (MIB2)
  Not compatible with MIB3!

Service and maintenance

• 1. AISIN automatic transmission service procedures
  
• 2. Distance since last mileage-dependent inspection (km)
  
• 3. DSG adaptation (DQ200, DQ250, DQ500)
  
• 4. Mass DTC clear in most of units
  This feature clears DTC codes in most of units in just one click (takes 1 second)
• 5. Max. distance until next mileage-related inspection (km)
  
• 6. Max. time until next time-dependent inspection (days)
  
• 7. Maximum distance between service (km)
  Step = 100 km
• 8. Maximum distance to service
  Step = 100 km
• 9. Maximum time between service (days)
  
• 10. Mileage since last service (km)
  
• 11. Minimum distance between service (km)
  Step = 100 km
• 12. Minimum time between service (days)
  
• 13. Reset service interval reminder
  
• 14. Reset value for next mileage-dependent inspection (km)
  
• 15. Reset value for next time-dependent inspection (days)
  
• 16. Time since last service (days)
  
• 17. Time since last time-dependent inspection (days)
  

Service reminder reset

• 1. Reset inspection service reminder
  One click solution to reset inspection service interval
• 2. Reset oil service reminder
  One click solution to reset oil service interval

Sounds and alarm

• 1. Activate anti-theft alarm system
  
• 2. Alarm on door opening with ignition turned on
  
• 3. Horn working when ignition turned off
  
• 4. Seat belts alerts
  
• 5. Seat belts alerts style
  

Tire pressure monitoring system (TPMS)

• 1. Indirect TPMS system activation (part #1)
  Uses ABS sensors to warn about low pressure in tires.
• 2. Indirect TPMS system activation (part #2)
  Uses ABS sensors to warn about low pressure in tires.
  This part should be applied only after a cycle of restarting all modules on your car.
• 3. Reset TPMS adaptation (for TPMS based on ABS sensors)
  

Wipers and washers (windshield, rear glass, headlights)

• 1. Headlight washer duty duration
  Minimum step = 10 ms
• 2. Headlight washer interval
  Headlight washer interval runs at X washes of windshield. To disable automatic front light washer, change this value to 0
• 3. Light sensor sensivity customization
  
• 4. Park windshield wipers after ignition turned off
  
• 5. Rear fog lights turned on warning when reaching speed limit
  Minimum step = 1 km/h, set 0 to disable warning
• 6. Rear wiper automatic function
  
• 7. Rear wiper comfort function
  
• 8. Stop wipers when opening hood
  
• 9. Stop wipers when opening hood
  
• 10. Teardrop mode (additional wipers pass) on the rear glass
  
• 11. Teardrop mode (additional wipers pass) on the windshield
  
• 12. Turn on headlight washer after holding washer lever for XX ms
  Minimum step = 10 ms
• 13. Windshield wiper service position activation through menu option
  Compatibility depends on installed MMI device.
• 14. Windshield wipers defrost position
  

Other

• 1. Automatic close doors at 15 km/h and open them when key removing
  
• 2. Automatically close driver window after locking car (only for MY2019+)
  
• 3. Automaticaly lock/unlock doors (for trims without color multimedia system)
  
• 4. Electric windows working when ignition turned off
  
• 5. Front fog lights: turn on fog when reversing
  
• 6. Start-stop function deactivation (temperature method)
  
• 7. Start-stop function deactivation (voltage method)
  

WARNING!
1) Coding & Service requires good ELM327 with full command set support.
2) Coding compatibility may depend on your car trim level and control units versions.

Available coding and service features for Volkswagen, Audi, Skoda, Seat cars, based on MLB-EVO platform.

Assistance

• 1. High beam assistance activation
  Requires assistance camera
• 2. Lane assist: activation
  Requires assistance camera installed
• 3. Lane assist: driver inactivity time threshold
  
• 4. Lane assist: patch for Side assist
  Apply this patch if you have Audi side assist installed
• 5. Lane assist: power steering support
  
• 6. Lane assist: steering wheel vibration
  For A5 unit 8W6907217
• 7. Lane assist: steering wheel vibration
  For A5 unit 8W6907217
• 8. Switch-off speed for parking assist (km/h)
  

Brakes (ABS, ESP, XDS, etc.)

• 1. Activate parking brake when ignition turned off
  

Climate

• 1. Aux heater: engine temperature priority
  
• 2. Aux heater: engine temperature priority
  
• 3. Steering wheel heat level #1 (°C)
  
• 4. Steering wheel heat level #2 (°C)
  
• 5. Steering wheel heat level #3 (°C)
  
• 6. Webasto warm interior + engine
  

Dashboard

• 1. Display oil temperature
  
• 2. Display oil temperature var.2
  
• 3. Laptimer
  
• 4. Pointer test (staging)
  
• 5. Show acceleration
  
• 6. Show free space in fuel tank in the dashboard
  
• 7. TPMS menu in dashboard
  
• 8. Units: Date format
  
• 9. Units: Distance
  
• 10. Units: Fuel consumption (gasoline/diesel)
  
• 11. Units: Pressure
  
• 12. Units: Speed
  
• 13. Units: temperature
  
• 14. Units: Time format (12/24)
  
• 15. Units: Volume
  

Doors, Locking and Unlocking

• 1. Enable menu item for auto-lock in the MMI
  
• 2. Locking/Unlocking rear lid with Keyless entry while engine running
  
• 3. Locking/Unlocking with Keyless entry while engine running
  
• 4. Locking/Unlocking with remote key while engine running
  

Engine and powertrain

• 1. Block DPF regenerations (diesel only)
  This prevents the automatic and manual regeneration of DPF. If you turn it on, make sure you regularly perform manual DPF regeneration. You will need to disable this option before manually regenerating DPF.

Exterior lights

• 1. Activate taillight with DRL
  
• 2. DRL menu in MMI
  
• 3. Enable “Light for left-hand traffic” in the MMI
  
• 4. Polite turn signals (1-5)
  

Interior lights

• 1. Deactivate speakers light (driver side)
  
• 2. Deactivate speakers light (passenger side)
  
• 3. Switch on reading lights when opening doors
  

Long coding

• 1. 01. Engine
  
• 2. 02. Transmission
  
• 3. 03. Braking system
  
• 4. 04. Power steering
  
• 5. 05. Authorization system for access and starting the engine
  
• 6. 06. Front passenger seat
  
• 7. 08. Heater and climate
  
• 8. 09. Onboard supply control unit
  
• 9. 09. Onboard supply control unit -> Subsystem 1 (Wipers/Rain sensor)
  
• 10. 09. Onboard supply control unit -> Subsystem 2 (RLHS)
  
• 11. 0E. Media player 1
  
• 12. 10. Parking Assistant 2
  
• 13. 11. Engine Electronics No. 2
  
• 14. 13. Active cruise control
  
• 15. 14. Email system Damping controls
  
• 16. 15. Srs
  
• 17. 16. Steering column
  
• 18. 17. Dashboard
  
• 19. 18. Additional heater
  
• 20. 19. CAN Gateway
  
• 21. 1B. Active steering
  
• 22. 21. Energy Management 2
  
• 23. 22. Four-wheel drive
  
• 24. 23. Increased braking force
  
• 25. 25. Immobilizer
  
• 26. 26. Electric folding roof
  
• 27. 28. Climate Control Panel
  
• 28. 32. Differential lock electronics
  
• 29. 34. Ride height control system
  
• 30. 36. Driver seat adjustment
  
• 31. 37. Navigation system
  
• 32. 3C. Lane change assistant
  
• 33. 3D. Special function
  
• 34. 42. Driver door electronic equipment
  
• 35. 44. Power steering
  
• 36. 47. Acoustic system
  
• 37. 51. Electric drive
  
• 38. 52. Front passenger door electronics
  
• 39. 53. Parking brake
  
• 40. 55. Headlights corrector
  
• 41. 57. Tv tuner
  
• 42. 5F. Electronic Information System 1
  
• 43. 65. TPMS
  
• 44. 69. Trailer functions
  
• 45. 6C. Rear view camera system var.1
  
• 46. 6D. Boot lid
  
• 47. 6F. Comfort system central module 2
  
• 48. 6С. Rear view camera system var.2
  
• 49. 71. Charger
  
• 50. 75. Emergency Call and Communication Module
  
• 51. 76. Parking assistant
  
• 52. 77. Telephone
  
• 53. 7F. Electronic Information System 2
  
• 54. 94. Srs
  
• 55. 95. Esp
  
• 56. A5. Front Assistant A5
  
• 57. BB. Rear door behind driver
  
• 58. BC. Rear door behind passenger
  

Mirrors

• 1. Comfort mirrors folding
  

Multimedia

• 1.
  May be it’s compaible with Android Auto too
• 2. Confirmation of installation changes
  Used after updating firmware, parts, POI, etc. to remove error 1555
• 3. Disable AM-radio
  
• 4. Display driving school mode in MMI
  
• 5. Restart mutltimedia system
  After applying some codings you need to restart your multimedia system for changes to take effect
• 6. Virtual display for Park assist
  

Seats

• 1. Comfort entry (driver seat)
  
• 2. Comfort entry (passenger seat)
  
• 3. Passenget seat adjustment with driver’s seat keys (seat symmetry). Step 1/2
  
• 4. Passenget seat adjustment with driver’s seat keys (seat symmetry). Step 2/2
  

Service and maintenance

• 1. Distance since last mileage-dependent inspection (km)
  
• 2. Distance since last service (km)
  
• 3. DPF service regeneration while driving
  
• 4. Mass DTC clear in most of units
  This feature clears DTC codes in most of units in just one click (takes 1 second)
• 5. Max. distance until next mileage-related inspection (km)
  
• 6. Max. time until next time-dependent inspection (days)
  
• 7. Maximum distance between service (km)
  Step = 100 km
• 8. Maximum distance to service
  Step = 100 km
• 9. Maximum time between service (days)
  
• 10. Minimum distance between service (km)
  Step = 100 km
• 11. Minimum time between service (days)
  
• 12. Reset service interval reminder
  
• 13. Reset value for next mileage-dependent inspection (km)
  
• 14. Reset value for next time-dependent inspection (days)
  
• 15. Time since last service (days)
  
• 16. Time since last time-dependent inspection (days)
  

Service reminder reset

• 1. Reset inspection service reminder
  One click solution to reset inspection service interval
• 2. Reset oil service reminder
  One click solution to reset oil service interval

Sounds and alarm

• 1. Seat belts alerts
  
• 2. Sound beep when locking/unlocking
  Requires manufacturer installed alarm system

Wipers and washers (windshield, rear glass, headlights)

• 1. Headlight washers
  Use this to enable or disable headlight washer

Other

• 1. 46 adapt template
  
• 2. 4B adapt 1
  
• 3. Battery capacity (Ah)
  
• 4. Easy Entry
  
• 5. Front PDS automatic activation
  
• 6. Front PDS beep distance (cm)
  
• 7. Start-stop function
  Deactivate start-stop
• 8. Wireless Apple CarPlay
  

WARNING!
1) Coding & Service requires good ELM327 with full command set support.
2) Coding compatibility may depend on your car trim level and control units versions.

List of MQB based cars:
Audi A1 Mk2, Audi A3 Mk3, Audi A3 Mk4, Audi TT Mk3, Audi Q2, Audi Q3 Mk2, Cupra Formentor, Jetta VS5 (China), Jetta VS7 (China), SEAT Ibiza Mk5, SEAT León Mk3, SEAT León Mk4, SEAT Arona, SEAT Ateca, SEAT Tarraco, Škoda Kamiq, Škoda Karoq, Škoda Kodiaq, Škoda Octavia Mk3, Škoda Octavia Mk4, Škoda Scala, Škoda Superb B8, Volkswagen Arteon, Volkswagen Atlas / Teramont, Volkswagen Bora (China), Volkswagen Caddy Mk4 , Volkswagen Golf Mk7, Volkswagen Golf Sportsvan , Volkswagen Golf Mk8 , Volkswagen Jetta MK7 , Volkswagen Lamando (China), Volkswagen Lavida (China), Volkswagen Passat Mk8, Volkswagen Passat NMS (Chinese second generation), Volkswagen Polo Mk6, Volkswagen T-Cross, Volkswagen T-Roc, Volkswagen Tayron (China), Volkswagen Tharu/Tarek (China, Americas), Volkswagen Tiguan Mk2, Volkswagen Touran Mk2, Volkswagen Viloran (China)

Available Coding & service features for MQB-based cars:
All wheel drive (4WD)

• 1. 4WD operation mode
  Haldex 5 acoustic algorythm model
• 2. Diesel: Anti hum measures – Gear 4
  
• 3. Diesel: Anti hum measures – Gear 5
  
• 4. Diesel: Anti hum measures – Gear 6
  
• 5. Diesel: Anti hum measures – Gear 7+
  
• 6. Diesel: Anti impact measures – Gear 4
  
• 7. Diesel: Anti impact measures – Gear 5
  
• 8. Diesel: Anti impact measures – Gear 6
  
• 9. Diesel: Anti impact measures – Gear 7+
  
• 10. Gasoline: Anti hum measures – Gear 4
  
• 11. Gasoline: Anti hum measures – Gear 5
  
• 12. Gasoline: Anti hum measures – Gear 6
  
• 13. Gasoline: Anti hum measures – Gear 7+
  
• 14. Gasoline: Anti impact measures – Gear 4
  
• 15. Gasoline: Anti impact measures – Gear 5
  
• 16. Gasoline: Anti impact measures – Gear 6
  
• 17. Gasoline: Anti impact measures – Gear 7+
  

Anti-theft alarm

• 1. Anti-theft alarm system: activation
  
• 2. Anti-theft alarm system: alarm signal style
  
• 3. Anti-theft alarm system: camper mode
  
• 4. Anti-theft alarm system: Deactivate by opening door lock.
  Highly not recommended!\nOriginal title: Schliesszylinder in_Richtung Oeffnen_aktiv (Thatcham inaktiv)
• 5. Anti-theft alarm system: deactivate sensors in HMI
  
• 6. Anti-theft alarm system: Disable cabin alarm sensor by double-click on lock button
  
• 7. Anti-theft alarm system: monitor inside locking leaver
  
• 8. Anti-theft alarm system: panic alarm delay
  
• 9. Anti-theft alarm system: parking heater (webasto)
  
• 10. Anti-theft alarm system: rear window break sensor
  
• 11. Anti-theft alarm system: sensor for interior monitoring
  
• 12. Anti-theft alarm system: siren alarms
  
• 13. Anti-theft alarm system: sound device
  
• 14. Anti-theft alarm system: tilt sensor
  
• 15. Anti-theft alarm system: use signal horn for alarms
  

Assistance

• 1. Activate road sign recognition system (Camera+Navigation system)
  Requires assistance camera 3Q0/3QD
• 2. Activate road sign recognition system (for camera 5Q0 980 653)
  Requires assistance camera 5Q0 980 653
• 3. Activate road sign recognition system (use only camera, no Navigation system installed)
  Requires assistance camera 3Q0/3QD
• 4. Active cruise control mode depending on drive mode
  Depending on drive mode (enable) or custom selection over menu (disable)
• 5. Adaptive lane assist
  Better detection of lane borders, keeps car in the middle of the lane
• 6. Adaptive lane assist: patch for menu item activation
  Apply this patch only if adaptive line assistance menu in MMI is disabled (compatibility: A5 unit 3Q0/3QD)
• 7. Anti-theft alarm system: delay before alarm system activated after locking car
  
• 8. Assistance camera parametrization with Traffic Jam Assist, Road Sign Recognition and Emergency Assist support
  WARNING! Experimental feature! Compatibility depends on installed hardware and software versions!
  Only for Assistance Camera 3Q0980654 or 3QD980654
  Traffic Jam Assist allows using Lane assist below 65 km/h (requires Lane assist and adaptive Lane assist activated)
• 9. Dynamic light assist for camera 3Q0
  
• 10. Enable high beam assistant + save it’s state after turning off ignition
  Requires installed assistance camera 3Q0*/3QD*/5Q0*
• 11. Fernlicht_assistent – Erweiterte Fernlichtassistent
  
• 12. Lane assist activation (camera 3Q0*/3QD*)
  Requires assistance camera 3Q0 980 654/3D0 980 654
• 13. Lane assist activation (camera 5Q0*)
  Requires assistance camera 5Q0 980 653
• 14. Lane assist activation (for new camera 2Q0980653)
  Requires assistance camera 2Q0980653 (e.g. Skoda SuperB MK3 MY 2020+)
• 15. Lane assist steering wheel vibrations
  
• 16. Overtaking from the right prevention when using ACC
  By default adaptive cruise control wouldn’t allow you to overtake from the right if there’s a car with lower speed on a left lane, you can disable this.
• 17. Park assist deactivation speed
  
• 18. Power steering support power
  
• 19. Road sign detection navigation patch
  Use navigation data for road sign detection or only camera
• 20. Save state of high beam assist after turning off ignition
  
• 21. Steering mode
  

Backup

• 1. All units backup
  Creates full backup of all long coding and all adaptation values. Takes a very long time!
• 2. Backup copy of unit 03
  
• 3. Backup copy of unit 05
  
• 4. Backup copy of unit 06
  
• 5. Backup copy of unit 08
  
• 6. Backup copy of unit 09
  
• 7. Backup copy of unit 10
  
• 8. Backup copy of unit 13
  
• 9. Backup copy of unit 17
  
• 10. Backup copy of unit 18
  
• 11. Backup copy of unit 19
  
• 12. Backup copy of unit 22
  
• 13. Backup copy of unit 36
  
• 14. Backup copy of unit 3C
  
• 15. Backup copy of unit 42
  
• 16. Backup copy of unit 44
  
• 17. Backup copy of unit 47
  
• 18. Backup copy of unit 52
  
• 19. Backup copy of unit 5F
  
• 20. Backup copy of unit 65
  
• 21. Backup copy of unit 6C
  
• 22. Backup copy of unit 6D
  
• 23. Backup copy of unit A5
  

Battery

• 1. Battery capacity (Ah)
  
• 2. Battery manufacturer
  
• 3. Battery serial number
  
• 4. Battery technology
  

Brakes (ABS, ESP, XDS, etc.)

• 1. Automatically turn on ESC after reaching speed 100 km/h
  
• 2. Brake booster level
  Possible values: 1-8
• 3. Brake disk drying
  Brakes are lightly applied automatically on regular intervals to keep the brake discs dry and ready for maximum braking
• 4. Corner brake control
  
• 5. Dynamic starting assist
  To get smooth start from Autohold set this option to “Early”
• 6. Engine drag torque control
  Limits engine torque to reduce wheel hop on start
• 7. ESC Off menu
  Options to display in ESC off menu: ASR off, ESC off, ESC Sport
• 8. Hill Hold control activation
  HCC prevents roll-back
• 9. Hill-start assistant
  Allows to start smoother with hill-start assistant (choose “early” option for that).
• 10. Hill-start assistant activation threshold
  
• 11. Hydraulic brake assistant
  
• 12. Starting vibration reduction (ASR adaptation)
  
• 13. Straight ahead brake stabilization
  
• 14. XDS (expanded electronic differential system) activation
  XDS system applies brakes to inside wheel to improve steering at high speed
• 15. XDS (expanded electronic differential system) adaptation
  XDS system applies brakes to inside wheel to improve steering at high speed

Climate

• 1. Air quality sensor sensitivity
  
• 2. AirCare system activation
  
• 3. Automatic Activation of front windshield heater at MAX-Defrost
  
• 4. Automatic drive wheel heater
  
• 5. Automatic drive wheel heater: MY 2021 patch (with wheel heat button on the drive wheel)
  Experimental function!
• 6. Blower adjustment in auto mode
  
• 7. Disengage aux. heater (webasto)
  
• 8. Display blower (fan) speed in auto mode
  
• 9. Front glass heater temperature threshold (C)
  Minimum step 0.5 C
• 10. Front glass heater time before turning off (seconds)
  Minimum step – 40 seconds
• 11. Keep AirCare on after engine restart
  
• 12. Rear glass heater temperature threshold (C)
  Minimum step 0.5 C
• 13. Rear glass heater time before turning off (seconds)
  Minimum step – 40 seconds
• 14. Save air recirculation state after turning off ignition
  
• 15. Steering wheel heater: 3 levels / 1 level
  
• 16. Temperature adjustment for hot countries
  
• 17. Temperature threshold for activation of fresh air blower (only for cars with additional heater – Webasto)
  Min. step = 1 °C
• 18. Unlock aux. heater (webasto)
  
• 19. Ventilation flaps adaptation
  

Dashboard

• 1. Active info display speedometer style
  
• 2. Active info display tubes style
  Most of possible values repeats default style. Usually sport style can be found under variant #3
• 3. Dashboard dial lights always on
  
• 4. Dashboard LCD display background style
  
• 5. Dashboard pointers lights always on
  
• 6. Dashboard sport view combination
  Compatible with LCD-dashboard
• 7. Digital (LCD) dashboard configuration menu in Multimedia system
  
• 8. Disable “Turn on lights” warning
  
• 9. Display oil temperature
  
• 10. Display state of charge (SoC)
  Not compatible with LED dashboards
• 11. Fuel consumption correction (%)
  Correction factor for fuel consumption and distance to empty
• 12. Fuel tank level calibration: Complete tank calibration
  
• 13. Fuel tank level calibration: Offset sensor 1
  
• 14. Fuel tank level calibration: Offset sensor 2
  
• 15. Fuel tank level calibration: Offset sensor 3
  
• 16. Icy weather warning: low threshold
  
• 17. Icy weather warning: upper threshold
  
• 18. R-Logo
  
• 19. Show acceleration
  
• 20. Show ambient temperature
  
• 21. Show free space in fuel tank in the dashboard
  
• 22. Show lap timer
  
• 23. Show warning when speed >120 km/h / 75 mph
  
• 24. Startup screen for dashboard
  Results depends on car brand: Audi, VW, Skoda, Seat. Usually “sport” style is variant 3.
• 25. Test pointers at engine start
  
• 26. Time format (24/12)
  
• 27. Units: Date format
  
• 28. Units: Distance
  
• 29. Units: Fuel consumption (gasoline/diesel)
  
• 30. Units: Pressure
  
• 31. Units: Speed
  
• 32. Units: temperature
  
• 33. Units: Time format (12/24)
  
• 34. Units: Volume
  
• 35. Wheel circumference
  Use this feature to adjust speedometer and odometer readings

Doors, Locking and Unlocking

• 1. Activate Easy Open (Part 1)
  Requires hardware parts to be installed!
• 2. Activate Easy Open (Part 2)
  Requires hardware parts to be installed!
• 3. Auto lock doors after speed threshold was reached
  
• 4. Auto unlock doors
  
• 5. Auto unlock doors when selector in parking
  
• 6. Autolock rear part of the vehicle
  
• 7. Automatically lock car doors when key is outside of the car and all doors are closed
  
• 8. Driver door power window shut off delay after ignition was turned off (seconds)
  Maximum = 1275 seconds, step = 5 seconds
• 9. Enable key open/close functions while engine running
  
• 10. Kessy active with ignition turned on
  Compatibility depends on car model.
• 11. Lock menu in MMI
  
• 12. Open and close windows holding key fob buttons
  
• 13. Prevent all door opening with KESSY
  You can enable this feature to prevent opening your car with key fob retranslator. You’ll be able to open doors only with key fob.
• 14. Prevent front door opening with KESSY
  You can enable this feature to prevent opening your car with key fob retranslator. You’ll be able to open doors only with key fob.
• 15. Tailgate easy closing (locking car after using Easy close button)
  
• 16. Tailgate opening and closing from key fob
  
• 17. Unlock doors options
  
• 18. Unlock menu in MMI
  

Engine and powertrain

• 1. Accelerator pedal response algorythm
  Better sensivity with “direct” value
• 2. Block DPF regenerations (diesel only)
  This prevents the automatic and manual regeneration of DPF. If you turn it on, make sure you regularly perform manual DPF regeneration. You will need to disable this option before manually regenerating DPF.
• 3. Drive mode profiles editor
  Experimental feature for advanced users!
• 4. Oil pump performance: second stage activation
  
• 5. Save current drive mode profile after ignition was turned off
  Saving profiles state: Comfort, Eco, Sport, Individual, and saving gearbox, engine, ESC, light, settings.
• 6. Throttle adaptation
  In some cases this procedure improves reaction on accelerator pedal for a period of time
• 7. Torque steering compensation (TSC)
  

Exterior lights

• 1. Coming home activation: automatic/manual
  
• 2. Coming home automatic activation trigger
  
• 3. Coming home/Leaving home lights
  
• 4. Coming home: duration (s)
  
• 5. Corner function: activation
  Highlight corners with fog lights when driving on low speed
• 6. Corner function: regulation
  ECE R119 – works when the steering wheel is turned and when the turn signal is turned on with a 1 second delay
  ECE R48 – only works when you turn the steering wheel
  FMVSS 517 108 – works when the steering wheel is turned and when the turn signal is turned on
• 7. Corner function: upper speed threshold
  Maximum speed threshold for corner lights activation. Minimum step = 0.5 km/h
• 8. DRL: Dimming front daytime running lights when turn lights active (Audi style)
  
• 9. DRL: DRL menu item in Multimedia system (MMI)
  
• 10. DRL: reduce brightness (when active in DRL/sidelights mode)
  For LED DRL
• 11. DRL: smooth turn on DRL after turn signal was turned off (compatibility: Skoda SuperB MK3)
  Skoda SuperB MY2019
• 12. DRL: Turn off DRL when parking brake activated
  
• 13. DRL: Turn off when light switch in off position
  DRL = Daytime running lights
• 14. DRL: wink with turn lights
  
• 15. Emergency braking: Blink with brake lights
  
• 16. Emergency braking: Blink with brake lights (phase 2)
  
• 17. Emergency braking: Turn on hazard lights
  
• 18. Front fog lights: activate with high beam
  
• 19. Front fog lights: Activate with high beam (Skoda Kodiaq/Karoq with LED)
  
• 20. Front fog lights: activate with high beam and blink with high beam blink
  
• 21. Front fog lights: Activate with high beam, blink fog lights when high beam blinks (Skoda Kodiaq/Karoq with LED)
  
• 22. Front fog lights: blink with high beam blink
  
• 23. Front fog lights: Blink with High beam blink (Skoda Kodiaq/Karoq with LED)
  
• 24. Front side lights: disable when headlights or high beam active (Skoda Kodiaq with HALOGEN headlights)
  Don’t use this with LED headlights!
• 25. Front turn lights: always active at half power (US style)
  Only for cars with incandescent lamps in turn signals
• 26. License plate: light type (LED/5W)
  
• 27. Light sensor installed
  
• 28. Light sensor sensivity
  
• 29. Light sensor sensivity: turn on headlights later
  Warning! To revert settings back use Coding history!
• 30. Light switch with AUTO installed
  
• 31. Limit the maximum number of simultaneously burning front lights to 2 types
  This is often used for stroboscope effect
• 32. Rear fog lights: activate both rear fog light (only Skoda Octavia A7!)
  
• 33. Rear side lights: Audi style (compatibility: Skoda Kodiaq)
  Rear side light dimming when rear turn lights are active
• 34. Rear side lights: Blink with turn lights (VW Tiguan II 3D-LED)
  
• 35. Rear side lights: dimm while turn lights are active (Audi Style) for VW Tiguan II with 3D-LED
  
• 36. Rear side lights: Turn on when daytime running lights are active (Scandiavian DRLs) (Skoda Kodiaq, etc.)
  
• 37. Rear side lights: Turn on when daytime running lights are active (Scandiavian DRLs) for VW Tiguan II with 3D-LED
  
• 38. Rear side lights: turn on when daytime running lights are active (Scandiavian DRLs) for VW Tiguan II with LED
  
• 39. Rear side lights: wink with rear turn lights
  
• 40. Rear side lights: wink with turn lights for Seat Leon 5F
  
• 41. Side mirror lights: turn on with 360 camera (AreaView)
  Uses lights in mirrors to highlight environment for cameras in mirrors
• 42. Stripes/Eyelashes in headlights: blink with turn signals (Skoda Kodiaq/Karoq with LED headlights)
  
• 43. Stripes/Eyelashes in headlights: turn on with DRL lights (Skoda Kodiaq/Karoq)
  
• 44. Turn lights: polite blinks count
  After applying this option reset light settings to factory defaults in car multimedia menu

Feedback signals

• 1. Acoustic feedback: activation or deactivation global setting
  
• 2. Acoustic feedback: duration when using signal horn
  
• 3. Acoustic feedback: menu in MMI
  
• 4. Acoustic feedback: use signal horn
  
• 5. Acoustic feedback: when locking
  
• 6. Acoustic feedback: when second close command
  Quittierton bei zweitem ZV-ZU-Befehl
• 7. Acoustic feedback: when unlocking
  
• 8. Confirmation sound when locking and unlocking central lock
  
• 9. Optical feedback: use 3rd brake light
  
• 10. Optical feedback: when comfort closing windows
  
• 11. Optical feedback: when locking
  

Interior lights

• 1. Ambient color selection for multimedia system and dashboard + colors changing with drive mode selection var.1
  Warning! Requires new generation BCM and CAN gateway software ver. >=4344
• 2. Ambient color selection for multimedia system and dashboard + colors changing with drive mode selection var.2
  Warning! Requires new generation BCM and CAN gateway software ver. >=4344
• 3. Ambient colors setup: dashboard and MMI (colors #1-10)
  Tap on a color to change it.
  After changing all colors – tap “Apply”.
  Warning: 100% black color with code 000000 equals to “no color” and breaks the list
• 4. Ambient colors setup: dashboard and MMI (colors #11-30)
  Tap on a color to change it.
  After changing all colors – tap “Apply”.
  Warning: 100% black color with code 000000 equals to “no color” and breaks the list
• 5. Ambient colors setup: doors (colors #1-10)
  Tap on a color to change it.
  After changing all colors – tap “Apply”.
  Warning: 100% black color with code 000000 equals to “no color” and breaks the list
• 6. Ambient colors setup: doors (colors #11-30)
  Tap on a color to change it.
  After changing all colors – tap “Apply”.
  Warning: 100% black color with code 000000 equals to “no color” and breaks the list
• 7. Ambient light color selection: 10 default colors (dashboard and multimedia)
  
• 8. Ambient light color selection: 10 default colors (doors lights)
  
• 9. Ambient light color selection: 30 colors (alternative color set) – Dashboard and multimedia system
  
• 10. Ambient light color selection: 30 colors (alternative color set) – doors lights
  
• 11. Ambient light color selection: 30 colors (Dashboard and multimedia system)
  
• 12. Ambient light color selection: 30 colors (doors lights)
  
• 13. Driving profile #0 Ambient color assignment (car off)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 14. Driving profile #01 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 15. Driving profile #02 Ambient color assignment (normal)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 16. Driving profile #03 Ambient color assignment (sport)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 17. Driving profile #04 Ambient color assignment (off-road)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 18. Driving profile #05 Ambient color assignment (ECO)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 19. Driving profile #06 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 20. Driving profile #07 Ambient color assignment (Individual)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 21. Driving profile #08 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 22. Driving profile #09 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 23. Driving profile #10 Ambient color assignment (snow)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 24. Driving profile #11 Ambient color assignment (individual off-road)
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 25. Driving profile #12 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 26. Driving profile #13 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 27. Driving profile #14 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 28. Driving profile #15 Ambient color assignment
  Choose one of ambient color, that is displayed when driving profile is selected. Possibile variants: 1-10 or 1-30, depending on number of available ambient colors.
• 29. Footwell light installed
  
• 30. Smooth turn on buttons light
  
• 31. Start engine button heart beat (pulsating light)
  
• 32. Turn on interior lights when tailgate opened
  

Lighting adaptations

• 1. 0 BLK VL B36
  Usually front left turn signal
• 2. 1 BLK VR B20
  Usually front right turn signal
• 3. 2 SL VLB10
  Usually front left side light
• 4. 3 SL VRB21
  Usually front right side light
• 5. 4 TFL LB4
  Usually front left DRL
• 6. 5 TFL RB32
  Usually front right DRL
• 7. 6 ABL LC5
  Usually low beam left
• 8. 7 ABL RB1
  Usually low beam right
• 9. 8 FL LB39
  Usually high beam left
• 10. 9 FL RB2
  Usually high beam right
• 11. 10 SHUTTER LB23
  Usually low beam left diagnostics
• 12. 11 SHUTTER RB22
  Usually low beam right diagnostics
• 13. 12 NL LB45
  Usually left fog light
• 14. 13 NL RB5
  Usually right fog light
• 15. 14 LOCKUNLOCK61
  
• 16. 15 35 LED Warnblinktaster C48
  
• 17. 16 BLK SLB35BLK SL KC9
  Usually left part of front DRL (stripes, etc.)
• 18. 17 TFL R BLK SRB3TFL R BLK SR KC3
  Usually right part of front DRL (stripes, etc.)
• 19. 18 BLK HLA60
  Usually rear left turn light
• 20. 19 BLK HRC31
  Usually rear right turn light
• 21. 20 BR LA71
  Usually left stop-signal
• 22. 21 BR RC8
  Usually right stop-signal
• 23. 22 BR MA57
  
• 24. 23 SL HLC10
  Usually rear left side light
• 25. 24 SL HRA65
  Usually rear right side light
• 26. 25 KZL HA59
  Usually number plate light
• 27. 26 NSL LA72
  Usually rear left fog light
• 28. 27 NSL RC6
  Usually rear right fog light
• 29. 28 RFL LC11
  Usually rear left reverse light
• 30. 29 RFL RA64
  Usually rear right reverse light
• 31. 30 FR LC72
  Usually foot light
• 32. 31 AMBL 1C61
  
• 33. 32 AMBL 2C35
  
• 34. 33 AMBL 3C36
  
• 35. 34 AMBL 4C37
  

Long coding

• 1. 01. Engine
  
• 2. 02. Transmission
  
• 3. 03. Braking system
  
• 4. 04. Power steering
  
• 5. 05. Authorization system for access and starting the engine
  
• 6. 06. Front passenger seat
  
• 7. 08. Heater and climate
  
• 8. 09. Onboard supply control unit
  
• 9. 09. Onboard supply control unit -> Subsystem 1 (Wipers/Rain sensor)
  
• 10. 09. Onboard supply control unit -> Subsystem 2 (RLHS)
  
• 11. 0E. Media player 1
  
• 12. 10. Parking Assistant 2
  
• 13. 11. Engine Electronics No. 2
  
• 14. 13. Active cruise control
  
• 15. 14. Email system Damping controls
  
• 16. 15. Srs
  
• 17. 16. Steering column
  
• 18. 17. Dashboard
  
• 19. 18. Additional heater
  
• 20. 19. CAN Gateway
  
• 21. 1B. Active steering
  
• 22. 21. Energy Management 2
  
• 23. 22. Four-wheel drive
  
• 24. 23. Increased braking force
  
• 25. 25. Immobilizer
  
• 26. 26. Electric folding roof
  
• 27. 28. Climate Control Panel
  
• 28. 32. Differential lock electronics
  
• 29. 34. Ride height control system
  
• 30. 36. Driver seat adjustment
  
• 31. 37. Navigation system
  
• 32. 3C. Lane change assistant
  
• 33. 3D. Special function
  
• 34. 42. Driver door electronic equipment
  
• 35. 44. Power steering
  
• 36. 47. Acoustic system
  
• 37. 51. Electric drive
  
• 38. 52. Front passenger door electronics
  
• 39. 53. Parking brake
  
• 40. 55. Headlights corrector
  
• 41. 57. Tv tuner
  
• 42. 5F. Electronic Information System 1
  
• 43. 65. TPMS
  
• 44. 69. Trailer functions
  
• 45. 6C. Rear view camera system var.1
  
• 46. 6D. Boot lid
  
• 47. 6F. Comfort system central module 2
  
• 48. 6С. Rear view camera system var.2
  
• 49. 71. Charger
  
• 50. 75. Emergency Call and Communication Module
  
• 51. 76. Parking assistant
  
• 52. 77. Telephone
  
• 53. 7F. Electronic Information System 2
  
• 54. 94. Srs
  
• 55. 95. Esp
  
• 56. A5. Front Assistant A5
  
• 57. BB. Rear door behind driver
  
• 58. BC. Rear door behind passenger
  

Mirrors

• 1. Activate mirrors heaters when rear window heater activated
  
• 2. Close mirrors by holding door keyless sensor
  
• 3. Fold mirrors when relocking
  Spiegelverstellung-Spiegelanklappen_bei_Wiederverriegelung
• 4. Mirror folding options in MMI
  Menuesteuerung Funk Spiegel anklappen
• 5. Mirror side light active when mirrors are folded
  
• 6. Mirrors heaters always active
  
• 7. Open side mirrors when unlocking or ignition starting
  
• 8. Profile function for folding mirrors
  Spiegelverstellung-Profilfunktion fuer Anklappung der Aussenspiegel
• 9. Put right mirror down when reversing (mirrors with memory function)
  
• 10. Put right mirror down when reversing (mirrors without memory function)
  
• 11. Synchronous mirrors adjustment
  
• 12. Unfold mirrors function
  Spiegelverstellung-Funk Spiegelanklappen

Multimedia

• 1. Access trip computer in multimedia when ignition turned off”
  
• 2. AM radio
  Enable or disable AM radio
• 3. AUX input activation
  
• 4. Confirmation of installation changes
  Used after updating firmware, parts, POI, etc. to remove error 1555
• 5. Display call pictures, album covers and radiostations art on Active info Display (AID)
  
• 6. Display driving school mode in MMI
  
• 7. Display oil level in multimedia system
  Audi TT
• 8. Eco driving statistics display (green/blue menu)
  
• 9. Microphone sensivity
  
• 10. Mirror link in motion speed threshold (MIB2)
  Use this to activate MirrorLink in motion
• 11. Mirror link in motion speed threshold (MIB3)
  Use this to activate MirrorLink in motion
• 12. MMI USB activation
  
• 13. Multimedia developer mode activation
  
• 14. Navigation: Compas position on the dashboard
  
• 15. Navigation: Data rate (Hz)
  Use this when installing multimedia system with navigation system
• 16. Navigation: Display compass and navigation on the dashboard
  
• 17. Navigation: GNSS Configuration: Beidou
  
• 18. Navigation: GNSS Configuration: Default receiver
  Use this when installing multimedia system with navigation system
• 19. Navigation: GNSS Configuration: External GPS 1
  
• 20. Navigation: GNSS Configuration: External GPS 2
  Use this when installing multimedia system with navigation system
• 21. Navigation: GNSS Configuration: Galileo
  
• 22. Navigation: GNSS Configuration: Glonass
  Use this when installing multimedia system with navigation system
• 23. Navigation: GNSS Configuration: GPS
  
• 24. Navigation: GPS receiver
  Use this when installing multimedia system with navigation system
• 25. Navigation: Navigation type
  Use this when installing multimedia system with navigation system
• 26. Rear camera installed (MIB2)
  Use this after manual installation of rear view camera
• 27. Rear camera installed (MIB3)
  Use this after manual installation of rear view camera
• 28. Region settings (part 1) [MIB3 Only!]
  
• 29. Region settings (part 2) [MIB3 Only!]
  
• 30. Restart mutltimedia system
  After applying some codings you need to restart your multimedia system for changes to take effect
• 31. Show offroad screen in multimedia system
  
• 32. SMS menu in Multimedia
  Reading and sending text messages over Bluetooth connected mobile phone
• 33. Startup screen for multimedia system
  
• 34. Video in motion speed threshold (MIB2)
  Use this to activate Video in motion
• 35. Video in motion speed threshold (MIB3)
  Use this to activate Video in motion
• 36. Wireless connectivity for Apple CarPlay and Android Auto (MIB3)
  Use this to activate wireless connectivity for Apple CarPlay and Android Auto. MIB3 only!

Multimedia: sound quality

• 1. Activate Skoda Skoda Suround, Virtual Subwoofer (not compatible with CANTON)
  Enables Skoda Suround, Virtual Subwoofer and disables voice transmission to rear passengers. Don’t use with CANTON! MIB3 not supported.
• 2. Additional amplifier (CANTON, Fender, Dynaudio, etc.) sound processing preset (MIB2)
  This feature changes sound configuration in additional amplifier (unit 47) to improve sound quality.
  WARNING! It takes about 3-5 minutes to read current data and 5-15 minutes to write new value!
• 3. Change acoustic system coding preset (MIB2)
  Requires acoustic system (Canton, Fender, Dynaudio, etc.) installed
• 4. Change acoustic system coding preset (MIB3)
  Requires acoustic system (Canton, Fender, Dynaudio, Beats, Harman Kardon etc.) installed
• 5. Skoda only: individual sound processing preset (MIB2 Entry/Swing 2 before 2017 with SW. ver. 6xxx, MIB2 STD)
  This feature changes sound configuration preset when you have activated Skoda Virtual Subwoofer & Skoda Surround. Not compatible with CANTON!
• 6. Skoda only: individual sound processing preset (MIB2 Entry/Swing2 after 2017, GP/Swing3 with SW. ver. 7xxx, 8xxx)
  This feature changes sound configuration preset when you have activated Skoda Virtual Subwoofer & Skoda Surround. Not compatible with CANTON!
• 7. Sound processing preset (MIB2)
  This feature changes sound configuration to improve sound quality
• 8. Sound processing preset (MIB3)
  This feature changes sound configuration to improve sound quality
• 9. Sound system type (MIB2)
  

Roof

• 1. Open and close sunroof by holding keyfob keys
  

Seats

• 1. Comfort entry (driver seat)
  Requires seat with memory function
• 2. Comfort entry (passenger seat)
  Requires seat with memory function
• 3. Driver seat fan level 1 high threshold (%)
  Minimum step = 1%
• 4. Driver seat fan level 1 low threshold (%)
  Minimum step = 1%
• 5. Driver seat fan level 2 high threshold (%)
  Minimum step = 1%
• 6. Driver seat fan level 2 low threshold (%)
  Minimum step = 1%
• 7. Driver seat fan level 3 high threshold (%)
  Minimum step = 1%
• 8. Driver seat fan level 3 low threshold (%)
  Minimum step = 1%
• 9. Driver seat heat level 1 high temperature threshold (C)
  Minimum step = 0.25 C
• 10. Driver seat heat level 1 low temperature threshold (C)
  Minimum step = 0.25 C
• 11. Driver seat heat level 2 high temperature threshold (C)
  Minimum step = 0.25 C
• 12. Driver seat heat level 2 low temperature threshold (C)
  Minimum step = 0.25 C
• 13. Driver seat heat level 3 high temperature threshold (C)
  Minimum step = 0.25 C
• 14. Driver seat heat level 3 low temperature threshold (C)
  Minimum step = 0.25 C
• 15. Lumbar massage: driver’s seat
  Temporarily activates a lumbar massage using an electric lumbar support. Requires power seats with memory function. Does not work if the vehicle is in motion.
• 16. Lumbar massage: passenger seat
  Temporarily activates a lumbar massage using an electric lumbar support. Requires power seats with memory function. Does not work if the vehicle is in motion.
• 17. Passenger seat fan level 1 high threshold (%)
  Minimum step = 1%
• 18. Passenger seat fan level 1 low threshold (%)
  Minimum step = 1%
• 19. Passenger seat fan level 2 high threshold (%)
  Minimum step = 1%
• 20. Passenger seat fan level 2 low threshold (%)
  Minimum step = 1%
• 21. Passenger seat fan level 3 high threshold (%)
  Minimum step = 1%
• 22. Passenger seat fan level 3 low threshold (%)
  Minimum step = 1%
• 23. Passenger seat heat level 1 high temperature threshold (C)
  Minimum step = 0.25 C
• 24. Passenger seat heat level 1 low temperature threshold (C)
  Minimum step = 0.25 C
• 25. Passenger seat heat level 2 high temperature threshold (C)
  Minimum step = 0.25 C
• 26. Passenger seat heat level 2 low temperature threshold (C)
  Minimum step = 0.25 C
• 27. Passenger seat heat level 3 high temperature threshold (C)
  Minimum step = 0.25 C
• 28. Passenger seat heat level 3 low temperature threshold (C)
  Minimum step = 0.25 C
• 29. Retention of driver’s seat heater level
  
• 30. Retention of passenger’s seat heater level
  

Service and maintenance

• 1. AISIN automatic transmission service procedures
  
• 2. Distance since last mileage-dependent inspection (km)
  
• 3. Distance since last service (km)
  Step #1 for reseting service reminder
• 4. DPF service regeneration while driving
  
• 5. DPF service regeneration while standing
  
• 6. DSG adaptation (DQ200, DQ250, DQ500)
  
• 7. DSG adaptation (DQ381)
  
• 8. Electric parking brake service routines
  
• 9. Haldex V electric pump adaptation
  Use this after replacing Haldex fluid or repair
• 10. Mass DTC clear in most of units
  This feature clears DTC codes in most of units in just one click (takes 1 second)
• 11. Max. distance until next mileage-related inspection (km)
  
• 12. Max. time until next time-dependent inspection (days)
  
• 13. Maximum distance between service (km)
  Step = 100 km
• 14. Maximum distance to service
  Step = 100 km
• 15. Maximum time between service (days)
  
• 16. Minimum distance between service (km)
  Step = 100 km
• 17. Minimum time between service (days)
  
• 18. Reset value for next mileage-dependent inspection (km)
  
• 19. Reset value for next time-dependent inspection (days)
  
• 20. Service interval reminder state
  Step #3 for reseting service reminder
• 21. Time since last service (days)
  Step #2 for reseting service reminder
• 22. Time since last time-dependent inspection (days)
  
• 23. Transfer fuel pump test
  Used to fill fuel system after parts replacing

Service reminder reset

• 1. Reset inspection service reminder
  One click solution to reset inspection service interval
• 2. Reset oil service reminder
  One click solution to reset oil service interval

Sounds and alarm

• 1. Alarm on door opening with ignition turned on
  
• 2. Seat belts alerts
  
• 3. Seat belts alerts style
  
• 4. Sound beep when closing/opening tailgate (with electric actuator)
  By default it’s enabled

Tire pressure monitoring system (TPMS)

• 1. Comfort: Front axle pressure (x10 kPa)
  For TPMS system with wheel sensors (TPMS/RDKS)
• 2. Comfort: Rear axle pressure (x10 kPa)
  
• 3. Disable direct TPMS system
  Disables direct TPMS system (with sensors in wheels) so you can enable indirect TPMS system
• 4. Fully loaded: Front axle pressure (x10 kPa)
  For TPMS system with wheel sensors (TPMS/RDKS)
• 5. Fully loaded: Rear axle pressure (x10 kPa)
  
• 6. Indirect TPMS system activation
  Uses ABS sensors to warn about low pressure in tires
• 7. Indirect TPMS system activation patch for Parking assist/Park pilot
  Apply this patch after activation of Indirect TPMS system, if your car is equiped with Parking assist/Park pilot (automatic parking system)
• 8. Load status selected
  For TPMS system with wheel sensors (TPMS/RDKS)
• 9. Reset TPMS adaptation (for TPMS based on ABS sensors)
  
• 10. Standard: Front axle pressure (x10 kPa)
  For TPMS system with wheel sensors (TPMS/RDKS)
• 11. Standard: Rear axle pressure (x10 kPa)
  
• 12. TPMS menu in Multimedia system
  

Wipers and washers (windshield, rear glass, headlights)

• 1. Front wipers end position (°)
  Minimum step = 0.0109890001°. Car Scanner would fix that for you, choosing closest possible value.
• 2. Front wipers service position (°)
  Minimum step = 0.0109890001°. Car Scanner would fix that for you, choosing closest possible value.
• 3. Front wipers start position (°)
  Minimum step = 0.0109890001°. Car Scanner would fix that for you, choosing closest possible value.
• 4. Headlight washer duty duration
  Minimum step = 10 ms
• 5. Headlight washer interval
  Headlight washer interval runs at X washes of windshield. To disable automatic front light washer, change this value to 0
• 6. Park windshield wipers after ignition turned off
  
• 7. Park wipers when opening hood
  
• 8. Rear fog lights turned on warning when reaching speed limit
  Minimum step = 1 km/h, set 0 to disable warning
• 9. Rear wiper automatic function
  
• 10. Rear wiper comfort function
  
• 11. Reduce washer delay
  
• 12. Stop wipers when opening hood
  
• 13. Teardrop mode (additional wipers pass) on the rear glass
  
• 14. Teardrop mode (additional wipers pass) on the windshield
  
• 15. Turn on headlight washer after holding washer lever for XX ms
  Minimum step = 10 ms
• 16. Whipers finish cycle after ignition turned off
  
• 17. Windshield wiper service position activation through menu option
  Compatibility depends on installed MMI device.
• 18. Wipers menu in multimedia system (MIB3 only)
  

Other

• 1. Automatically close windows when rainy
  Compatibility depends on car model, trim and rain&light sensor model
• 2. Distance left for deactivation of transport mode (power saving mode)
  
• 3. Driver door comfort closing and opening
  Window would go a bit down and up to make door closing easier
• 4. Front fog lights: turn on fog when reversing
  
• 5. Light switch with fog lights switch installed
  
• 6. Passenger door comfort closing and opening
  Window would go a bit down and up to make door closing easier
• 7. Personalization: activation
  Remember settings for different keys
• 8. Personalization: Patch for driver seat with memory function
  
• 9. Start-stop function deactivation (climate unit method)
  
• 10. Start-stop function deactivation (temperature method)
  This method compatibility depends on your car. On newer cars VAG disabled this method.
• 11. Start-stop function deactivation (voltage method)
  This method compatibility depends on your car. On newer cars VAG disabled this method.
• 12. Transport mode (power saving mode)
  Reduces battery drain while car turned off

Information valid for version 1.76.5/1.76.6.

WARNING!
1) Coding & Service requires good ELM327 with full command set support.
2) Coding compatibility may depend on your car trim level and control units versions.